KEA DHCP issue with PXE boot using FOG
-
Hi Everyone,
I'm facing an issue when UEFI PXE boot using FOG it's not working with kea DHCP but the legacy boot works fine. However when I change the DHCP to ISC DHCP UEFI PXE boot works.
Is there there a fix for this issue?
-
Read Netgate Adds Kea DHCP to pfSense Plus Software Version 23.09
If you're all fine with what's been said over there, you can use kea.
In your case : use ISC DHCP -
@Gertjan Yes, ISC DHCP for now but it will be removed from a future version of pfSense.
-
Of course it will be removed in the future
As it isn't maintained anymore
and
If someone finds a huge security issue
and
Maintainers (ISC DHCP) will not addresses the issue as "hey, a better one without issues is available(KEA)"
and
Netgate (pfSEnse) can't/will not address the issue
and
[more, for me unknown conditions, you pick one or more]
then
Yes, dhcpd will get removed.My estimation : 2028 ? Or 2029 ... I'm not sure.
Keep in mind : the initial dnsforwader "dnsmasq", present during the early days of pfSense is still there.
Then came unbound, the resolver, but dnsmasq never left, it's still avaible for the hard core forwarders. -
@Gertjan said in KEA DHCP issue with PXE boot using FOG:
My estimation : 2028 ? Or 2029 ... I'm not sure.
This is good enough. Hopefully, Kea will be ready by this time.