@mcury said in Ts Shara UPS Xpro Senoidal 2000 Universal 2BS 9AH:
Tried local USB and local serial, both are able to connect to the UPS..
Q1 is not answered, or gets shorts reply.
Same goes for QGS, QS, HW, WH, and all other questions NUT does to the UPS.
Did you try usbhid-ups? This should always be the first driver to try with a USB based UPS. If you haven't already:
In Services / UPS / Settings, change the UPS Type to "Disabled" and save.
Disconnect the USB cable.
Wait a few seconds
Reconnect the USB cable.
In Services / UPS / Settings, change the UPS Type to "Local USB", and the Driver to "usbhid" and save.
Going back to qx, if Q1 is not answered then qx isn't the right driver. However... the qx UPSs can have protocol state problems. You have to disconnect/reconnect the USB cable when you change the driver, subdriver or protocol.
If it actually is a qx UPS, I would recommend starting with this:
subdriver = "phoenix"
See this topic for an extensive exploration of qx.
If you post debug output, I might be able to help more.