@Jedi2155 said in Cannot get DHCP functioning on 2nd Interface:
I configured a VLAN on it
which means you have also, on the other side of the wire**, a VLAN capable switch set up correctly.
** this wire is the LAN cable going to this switch, this wire transports the LAN, and VLAN packets
Can you show this (VLAN) static IP setup ? (and show that it has been set up with something bigger as /32, example /24)
And show the DHCP server setup of this (V)LAN interface, with the pool.
@Jedi2155 said in Cannot get DHCP functioning on 2nd Interface:
but when I try to setup another port (2.5gbe, igc1) as a separate network it won't give me a functional DHCP (tried both Kea & ISC backends).
Assign the interface :
6931368b-2e3b-4a95-bcb0-9e3caa298e08-image.png
Activate it, give it an IPv4 IP and mask :
53725ba3-0b95-444a-9822-635bc426297e-image.png
Activate DHCP and add a pool :
84b48e43-7155-4b7e-b749-b11e57af96ba-image.png
Enjoy.
Do visit
e78cbd8b-2296-4c8c-9d33-64e0354a2d0b-image.png
and add some pass rules.
DHCP will work, but that's about it for now ^^